The balance point of the series: a 1.1" global-shutter sensor with oversized 9 µm pixels streaming 1600×1100 at 665 fps full resolution. Big pixels for clean low-light capture, a big buffer for burst acquisition.
| Model | WP-GX180 (Color) / WP-GX180M (Mono) |
|---|---|
| Resolution | 1600 × 1100 (1.8 MP) |
| Frame rate | 665 fps @ full resolution |
| Sensor | 1.1" CMOS, global shutter |
| Pixel size | 9.0 × 9.0 µm |
| Active area | 14.4 × 9.9 mm |
| Exposure time | 1 µs – 1153 ms |
| Sensitivity | 4910 mV (1/30 s) |
| Bit depth | 12 bit |
| Output formats | Mono8 / Mono12 · Bayer8 / Bayer12 |
| Spectral response | Mono 380–1050 nm · Color 380–650 nm |
| Frame buffer | 1 GB (burst acquisition / packet re-send) |
| Data interface | 10GBase-T (compatible 100M / 1G / 2.5G / 5G) |
| GPIO | 2-in / 2-out + 1 configurable; trigger & strobe sync |
| Acquisition modes | Continuous · software trigger · hardware trigger |
| Lens mount | C-mount (1.1" sensor — requires ≥1.1" image-circle optics) |
| Software support | GIGE Vision / GenICam / Halcon / LabVIEW / DirectShow |
| OS support | Windows / Linux / ARM Linux / Android / macOS |
| Power | DC 12 V, <12 W |
| Dimensions / weight | 64 × 64 × 61.7 mm · <550 g |
| Operating temperature | 0 – 50°C |
Source: manufacturer manual V24.05. Sensor part number and certification documents available during technical review.
1.1"-format optics to avoid vignetting. Tell us your field of view and we will pick the focal length.
PCIe 10-gigabit adapter and shielded Cat 6a up to 100 m. Required for full-rate capture.
Locking power connector and opto-isolated trigger/strobe harness.
High-speed scenes need short, bright pulses. We size lighting power to your exposure time.