PCB & SMT Inspection
PCB visual inspection (AOI re-check, missing/wrong/misoriented parts, polarity) happens board-by-board on a moving conveyor: the board never stops, the camera flies — resolution and frame rate decide boards per minute.
What the application demands
- ▸Global shutter + encoder-triggered sync to the conveyor
- ▸Multi-station GigE networking — one cable per station
- ▸Barcode/character legibility for OCR verification
Typical configuration
- ⚙1.3 MP / 5 MP GigE cameras per station
- ⚙Ring + coaxial light combo for solder joints and solder balls
- ⚙Multiple cameras aggregated into one IPC
Recommended models
WP-US130Entry workhorse · 1.3 MP global shutter · 213 fps
1.3 MP global shutter213 fps @ full resUSB3.0 plug & play
WP-GS130GigE entry · 1.3 MP global · 300 fps
1.3 MP global shutter300 fps @ full res100 m GigE cable
WP-GS510Mid-range workhorse · 5 MP global shutter
5 MP global shutterGigE 100 m cableMid-range workhorse
WP-5M0420-CBundled accessory · 5 MP-class · C-mount zoom
4–75 mm focal range5 MP classC-mount thread
YV-SYS-VIS
YV-SYS-VISCamera + lens + lighting + software, integrated
Turnkey delivery$1.2k–3k rangeTested as one system
Send us your station parameters
Target, speed, smallest defect, cycle time — send them over and get a configuration and quote within 24 hours.