Electronics Assembly Inspection
SMT lines place components several per second: 0402 flying-shot checks, solder-joint quality and connector-seating verification must all happen at full line speed — the line never slows down for inspection.
What the application demands
- ▸Global shutter to kill flying-shot smear
- ▸Resolution covering the smallest parts (0402 ≈ 1.0 × 0.5 mm)
- ▸Frame rate matching cycle time (>100 cpm)
Typical configuration
- ⚙1.3 MP USB3 (213 fps) for high-count stations
- ⚙5 MP GigE for mid-speed, high-resolution stations
- ⚙WP-GX280 (2.8 MP @ 410 fps) where speed and resolution both matter
Recommended models
WP-GX280High resolution · 2.8 MP at 410 fps full resolution
2.8 MP 1936×1464410 fps @ full res2/3" CMOS
WP-US130Entry workhorse · 1.3 MP global shutter · 213 fps
1.3 MP global shutter213 fps @ full resUSB3.0 plug & play
WP-US2000High-res value pick · 20 MP USB3.0
20 MP 5K classUSB3.0 plug & play1" CMOS large format
WP-GS510Mid-range workhorse · 5 MP global shutter
5 MP global shutterGigE 100 m cableMid-range workhorse
WP-GS2000High-end area scan · 20 MP 5K global shutter
20 MP 5K classGlobal shutter100 m GigE cable
WP-GS12004K-class · PoE single-cable power
12 MP 4K classPoE single cable100 m GigE cable
TC-65-STDFor metrology · eliminates perspective error
65 mm telecentricMetrology gradeC-mount thread
WP-UV420MSpecialty · UV fluorescence & micro-scratches
4.2 MP UV band< 400 nm responseOn demand supply
Send us your station parameters
Target, speed, smallest defect, cycle time — send them over and get a configuration and quote within 24 hours.